KangerTech, one of the earliest electronic personal vaporizer manufacturers in China, was established in 2007. Due to the primary focus on innovation and invention, their vaporizer models are quite popular in North America and the European Union. They uphold the highest quality standards -- therefore, all KangerTech products must pass CE, RoHS and SGS certifications and meet the international environmental management system's rigorous ISO 14000 standards.
The Dripbox starter kit is an all-in-one 60w bottom fed RDA and Dripmod with a 7ml e-liquid capacity. The kit includes: the Dripmod with Subdrip. Together they are roughly 4 ½" in height by 1 ¾" in width. The lower level includes the user manual, authenticity card, battery stickers, USB cable, a spare 0.2ohm coil pack, mini blue screwdriver with spare coils, Japanese organic cotton and a spare e-liquid bottle.
The Dripmod is a 60 watt regulated squonk mod. It's 510 threaded and features a single fire button with no settings or LCD screen. Five clicks will turn it on or off. Charge the Dripmod via the mini USB port or use a 30amp 18650 battery. The power button will flash 15 times when a battery change is needed. The battery compartment features a battery lock by loosening the bottom nut. To insert the battery, unscrew the battery cap. Insert the battery and replace the cap. If your battery is loose, the Dripmod will not work. Tighten the battery lock until snug to make contact.
To fill with e-liquid, remove the magnetic e-liquid cover. Pull the bottle down and twist off of the plug. Fill up the e-liquid bottle stopping at the neck. Re-insert the bottle into the plug and push up into the Dripmod. Replace the e-liquid cover. The Subdrip is a 510 threaded RBA that features replaceable 0.2ohm coils. It comes in four sections. The drip tip connector, The Subdrip cover which covers the drip coil base which holds the drip coils. The coils can easily be replaced by unscrewing them from the base.
To get started vaping, squeeze the bottle a few times. E-liquid will be forced into the tube which leads to the holes in the base. Soak the cotton to your desired amount. For new coils, add a few drops from the top. You can also direct drip from the top as an alternative method. Replace the cap and you're ready to vape. Twist the drip tip connector to adjust airflow.
