The Halo Reactor box mod starter kit is the new edition to the Halo hardware line up. The Reactor mod is a 50 watt box mod featuring adjustable wattage and voltage settings with a 4400 mah battery capacity. The starter kit comes with the Reactor mod and the attached Reactor tank. The lower level holds three boxes. The USB cable, a wall adapter and an accessories kit which holds the instruction manual, a stainless steel mouthpiece and a spare .5 sub-ohm, dual-coil head. The Reactor mod has a 4400 mah battery capacity with an adjustable power range from 5-50 watts or 2-10 volts. Five clicks of the power button turns it on or off. Three clicks switches the wattage and the voltage. The power can be adjusted by pressing the up and down buttons which will be displayed on the LED screen. The Reactor mod will typically take five hours to reach a full charge.
The Reactor Tank is an adjustable airflow, stainless steel tank with a 5ml e-liquid capacity. It comes assembled with a wide-bore, glass mouthpiece and can be disassembled into four main parts for cleaning. The kit comes with two .5 sub-ohm, dual-coil heads. One in the box and one pre-installed in the Reactor Tank. Turn the tank upside down to fill with e-liquid. Halo Cigs has just released a high VG e-liquid line designed for use with their tanks. Fill the Reactor Tank about 3/4 full just below the steel ring. Once full, screw the base onto the bottom of the tank. Twist the airflow ring left or right to adjust the vapor production.